Ultimaker S5 Review

Ultimaker S5 Review

The Ultimaker S5 is a professional-grade 3-D printer. It isn’t always very reasonably priced however remarkably justifies its value with a lot of gear and functionalities. Other fashions geared to the equal forms of customers promote for notably less. Features consist of twin extruders, a huge dimensional printing area, clean setup and use, and excellent average print quality. Ultimaker is a well-known participant in the 3D printing industry, particularly in the open-source community. It’s no surprise that the Ultimaker S5 is one of the few manufacturers renowned for producing high-quality professional 3D printers. So, perhaps, my review is more informative than a spec sheet with maximum construction size and extruder temperatures.


The Ultimaker S5 can connect to a printer through Wi-Fi or Ethernet, and it can also print from a USB flash drive plugged via the front-facing connector. Their user-friendly browser-based interface shows a print queue where documents can be reordered, duplicated, or deleted. The Wifi camera can be useful for checking on longer prints

Operating System:

For management and diagnostics, a professional 3D printer requires top-of-the-line software and platform tools. Many 3D printing users are familiar with Ultimaker’s Cura slicing software. Almost everything is possible with this program, from live streaming of prints to remote loading of print files. Users may easily comprehend how the program works because of its intuitive design.


The Ultimaker S5 is a 3D printer that is ready to use right out of the box. This task’s details may be found in the fast setup guide. You must connect the printer to the network and, if necessary, update the firmware. Before you can print, you must first set up the program. This includes how to get started with your first Cura model.


You may print with two different materials at the same time with the Ultimaker S5 3D printer. It comes with three extruders (or cores), two of which are branded “AA” and one “BB.” The AA core is suitable for most materials, whereas the BB core is developed specifically for printing PVA (water-soluble) supports. The extruders, fortunately, are quite simple to snap into and out of place.


The Ultimaker S5 3D printer is pre-assembled and is 495 x 585 x 780 mm in size. It has a build volume of 330 x 240 x 300 mm and a print resolution of 20 microns to 600 microns, with a build volume of 330 x 240 x 300 mm. The nozzle has a print temperature of 280°C and can print with the most difficult filaments as well as those with greater melting points.


The Ultimaker S5‘s print quality ranged from acceptable to exceptional. It performed admirably on our geometric test object, which required it to print a variety of geometric structures and raised lettering on a steeply sloped plane. There was a small amount of warping at the top, but it was far less what we’ve observed on other Ultimaker printers.

ultimaker s5 print quality


The printer produces a reasonable amount of noise. Although it would be quieter if it were entirely enclosed, the glass doors do help to reduce noise levels. It will produce less noise if you maintain it clean and lubricated. Maintenance notifications on the internet portal let you know when it’s time to do things like apply oil and adjust belts.

Huge Body:

This is something that can be found in all of Ultimaker’s products. Users are often astonished by the company’s robust structure. Consequently, there are no vibrations experienced while printing with the Ultimaker S5. As a result, a superior finish and precision are achieved.


  • Setting it up and using it is easy.
  •  Cura provides remote access to the print through a color touchscreen 


  • At default resolution, printing is rather expensive. 


For professional and creative contexts, the Ultimaker S5 is a workhorse. It creates high-quality printouts and is very dependable, user-friendly, and adaptable. Design studios, prototyping businesses, and architecture firms will all benefit from it. It is deserving of our Editors’ Choice because of its multiple extruders, high print quality, huge build capacity, and ease of setup and operation.

Similar Posts