Anycubic Vyper Review 3D Printer Worth Your Investment

The Anycubic Vyper is a 3D printer with an open frame. It has a lot of features that other 3D printers don’t have. Automatic bed leveling, for example, eliminates the frustration of manual leveling. It’s a terrific deal, even if the print quality and dependability aren’t quite as high as the Original Prusa Mini

---

Features:

The automatic leveling feature on the AnyCubic Vyper is simple to use and eliminates the need to modify the location of your printer frequently. It takes less than three minutes to calibrate a printer, and you don’t have to change the machine’s bed at all during that time.

Design:

The AnyCubic Vyper 3D printer comes partially constructed and includes a touchscreen that serves as the device’s user interface. There are a few locations where the shrink wrap has a less-than-pleasant finish, as well as a weird ‘wax-like substance on the head of some cables, but these appear to be mainly cosmetic issues rather than affecting the machine’s health.

Filament:

Spring steel is coated with polyetherimide (PEI), a thermoplastic polymer typically used to cover print beds, on the Anycubic Vyper 3D printer’s print bed. Objects stick to it well during printing but are easy to remove after the print is finished. Because the base model comes with only a small coil of filament, you’ll need to purchase at least one spool when purchasing the printer. PLA is a good choice for novices, and Anycubs sells 1-kilogram spools in a range of colors for apiece.

Printing:

It has a stable foundation for 3D printing thanks to auto-bed leveling and good adherence. Aside from the poor support settings, this Steam Deck has some extrusion faults – not necessarily the printer’s fault, but something that has been seen in other prints using different filaments. Some printers wow you with end-use-looking prints right away, while others underwhelm you.

Setup:

You can make a print as soon as you’ve utilized the auto-bed-leveling tool because there’s a test print on an SD card. Just keep in mind that the SD card must be put vertically into the slot on the front of the printer, with the label facing the ground.

Software:

When I tested the Anycubic Vyper 3D printer, it was not supported by the open-source Cura software package. There is a workaround, but you must first consult the user handbook before applying it. Draft (300 microns), Normal (200 microns), and High (300 microns) are the standard resolution settings (100 microns). It has a one-year warranty, but competitor Prusa printers offer two-year warranties.

Performance:

The AnyCubic Vyper can print quickly while remaining quite quiet. The loud dual-fans, rather than the movement of the printer, are the source of most of the noise. The SD card that comes with the printer has an owl figurine on it that has already been optimized. The LCD screen’s time accuracy isn’t fantastic, but you can improve it by turning on ‘acceleration control’ and ‘jerk control.’ Right out of the box, the AnyCubic Vyper is a powerful printer.

Regardless of what you’re creating, preheating the filament and bed takes about two minutes. Despite making minor tweaks to the given settings, we didn’t have any unsuccessful prints. The Z seam is unattractive, but it may be considerably improved by tweaking a few Cura settings.

Conclusion:

The Vyper by Anycubic is a low-cost 3D printer with an open-frame design and automatic print-bed leveling. Just keep in mind that some minimal assembly is required, and printed things may need to be cleaned up afterward.